WARMINGHOME

💷 Heating Cost Calculator

Enter a heater's power, how long you run it, and your energy rate to estimate the running cost — compare appliances and plan what heating will cost you this winter.

🧮 Estimate Your Running Cost

What is a Heating Cost Calculator?

It turns a heater's power and your usage into money. Enter the kilowatts it draws, the hours per day, the number of days, and your per-kWh rate, and it multiplies them into the total running cost — the figure that actually lands on your energy bill.

Use it to compare a plug-in space heater against central heating, decide whether that old fan heater is worth running, or budget for a cold snap. Change any input to see instantly how usage, rate, or a more efficient appliance changes the cost.

A safety note: fuel-burning appliances such as wood stoves and gas or oil heaters should be installed by a qualified installer and need a carbon monoxide alarm. Keep portable heaters clear of furniture, curtains and bedding, never leave one on unattended, and do not run one from an extension cord or lead unless it is rated for the heater.

❓ Frequently Asked Questions

How does the heating cost calculator work?

It multiplies the heater's power in kilowatts by the hours you run it each day, the number of days, and your energy rate per kilowatt-hour. The result is the total running cost over that period, in whatever currency your rate is in.

Where do I find a heater's power rating?

It's on the appliance label or in the manual, usually in watts or kilowatts — divide watts by 1,000 to get kilowatts (a 2,000 W heater is 2 kW). Many electric heaters have switchable settings, so use the setting you actually run at.

Why is a heat pump so much cheaper to run?

A resistive electric heater turns one unit of electricity into one unit of heat. A heat pump moves heat rather than generating it, so it delivers more than one unit of heat per unit of electricity. How much more depends on the flow temperature it runs at and on the outdoor conditions: at higher flow temperatures its running cost is around a third to a half of what this calculator shows for the same heat output, lower at low flow temperatures, and colder outdoor air pushes it up. Divide the figure by the pump's measured or seasonal coefficient of performance to compare.

Are these figures exact?

They're an estimate based on steady running at the values you enter. Real bills vary with thermostat cycling, standing charges, tariff changes, and how cold it gets, so use the result to compare options and budget rather than as a guaranteed bill.